Respiratory (Buxco) Hardware
-
Aeroneb Lab Nebulizer Head Specifications
Physical Nebulizer Unit dimensions: 45 mm H x 50 mm W x 50 mm D (1.77 in. H x 1.97 in. W x 1.97 in. D) Control Module dimensions:33 mm H x 75 mm W x 131 mm D(1.3 in. H x 2.9 in. W x 5.2 in. D) Cont...
Read More >> -
Allay Restraint - Part Numbers, Colors and Sizes
The patented Buxco® Allay™ restraint secures the animal without compressing the thorax and keeps airways completely unobstructed. This restraint improves animal comfort and respiratory data colle...
Read More >> -
Calibrating the Buxco Multi-function Bias Flow
The following video demonstrations the process used to calibration the Buxco Multi-function Bias Flow. The steps used in this video are also described below. To calibrate the Buxco Bias Flow you...
Read More >> -
DSI Buxco Controller Power Supply Specifications
Many of the DSI Buxco Controllers use the GST220A12-R7B power adapter (DSI Part #601-2552-001). The specification sheet for this adapter may be downloaded below. The following DSI Buxco Controller...
Read More >> -
E-Cigarette, VAPE, and Tobacco (EVT) Smoke Machine Generator Dimensions
Data Sciences International has developed the Buxco® EVT Smoke Generator. The EVT Smoke Generator is designed to generate aerosolized particulates from a cigarette, 1st Generation E-Cig, Pen, or Mo...
Read More >> -
FinePointe Respiratory Chamber and Accessory Care
Plethysmographs, chambers, and accessories are easy to care for and require very little maintenance. Follow the directions in the attached document to keep your equipment clean and operating as des...
Read More >> -
How to have a TSI Flow Meter Calibrated.
The simplest, fastest, most economic way to have a TSI Flow Meter calibrated it to contact TSI directly. TSI has a web based Return Material Authorization process where you can log in and request ...
Read More >> -
How to repair and calibrate a Validyne Transducer
DSI offers both repair and calibration for Validyne Transducer. The Validyne Transducer is manufactured by Validyne Engineering. They also offer both repair and calibration for the Validyne Trans...
Read More >> -
How to Repair and Calibrate an Hans Rudolph Pneumotach and Controller
DSI offers both repair and calibration for Hans Rudolph Pneumotach and Controller. The Pneumotach and Controller are manufactured by Hans Rudolph, Inc. Hans Rudolph also offers both repair and ca...
Read More >> -
Installing FinePointe WBP and NAM Controller Firmware
The attached Technical Note will walk you through the necessary steps to update the firmware of your WBP or NAM controller. This Technical Note only applies to Hardware Revisions which meet the cri...
Read More >> -
Testing the Accuracy of the FinePointe Calibrator
This is a simple test that you can use to check the FinePointe Calibrator for accuracy. Injecting a known volume of air is a common standard for calibrating volume and flow measurements in respirat...
Read More >> -
Use of Temp/Humidity Reference Probe
FinePointe WBP and Inhalation Tower systems may include Temperature/Humidity probes that are used to measure those values in the air exposed to the subjects. These probes can drift over time when ...
Read More >> -
Viscosity Limitation of Aerogen Nebulizer Heads
According to Aerogen, the manufacturer of these nebulizer heads, the aerosolization rate declines and the head loses efficiency more rapidly at a viscosity of 1.3 cps and higher. Frequent efficien...
Read More >>