The following outline the power requirements/specifications of the CLC and MX2.
- PoE – this is a 12.95W Max PoE, conforming to the IEEE 802.3af Power-over-Ethernet standard
- DC jack – 5V @ 2.5A Max (not what the CLC/MX2 will draw, but specs for the supply)
- Receiver Jacks – 6.75V supplied to the RPC receivers. Each receiver typically draws ~10-15mA
Note: The PoE is powered by an off-the-shelf POE switch (power sourcing equipment, PSE) which also has to conform to the standard.