This article is composed of 2 videos, System Overview and System Assembly.  The System Overview video gives a general overview and introduction to the following topics: Stackable Tower, Allay Restrainer, Main Control System, Aerosol Generation, Aersosol Conditioning, Aerosol Analysis.  The System Assembly video covers the assembly and disassembly of the tower level (to include inner & outer tube), chamber adapter, site plugs, tower cap, tower power adapter, and tower bottom plate. Also, the functionality of the chamber site plug is discussed.  

For any questions pertaining the dimensions of the tower, please see Inhalation Tower System Dimensions

Inhalation Tower System Overview

If you are new to the Inhalation Tower system or would like a general overview of the system before purchasing or assembling it, please view the below video first:

Assembly and Disassembly of the Inhalation Tower System

This next video covers the following topics in regards to the Inhalation Tower Assembly, Cleaning, and Maintenance

• Adding Additional Levels
  • Adding Additional Inner/Outer Core
  • Adding Additional Site Plugs & Adapter
• Disassembling a Multi-Level Inhalation Tower
  • Removal of Tower Port Adapter
  • Removal & Functionality of the Site Plug
  • Removal of Tower Cap
  • Removal of Level's Inner/Outer Tube
  • Removal of Tower Bottom Plate from Base Plate

 Next video:  https://support.datasci.com/hc/en-us/articles/360050042393-Inhalation-Tower-Controller-and-Basic-Setup