Ponemah v6x Acquisition & Review

Recording video from 8 different sources requires significant CPU power.    To make it possible to record 8 video sources in Noldus Media Recorder 4.0, DSI recommends: Decrease the resolution to 6...

In the event that PNMWAV (waveform) files are copied from an experiment without the PNMEXP (experiment) file or the PNMEXP file is corrupt, Ponemah can create a new PNMEXP file from the data files....

Background: By default, one Derived Parameter List View will be available for each Subject being sampled. This is ideal when each Subject has a large number of Channels and associated Derived Param...

Ponemah v6.x requires the Adjust for Daylight Saving Time be enabled on the acquisition computer in order to be able to start the telemetry acquisition. The data time stamps will reflect the time c...

Ponemah permits the Sampling Rate for an implant channel be changed in the middle of an Experiment. However, Ponemah will only permit the data collected prior to the Sampling Rate change or the da...

This section describes the folders and files types created by Ponemah v6.x during Installation and Acquisition. Main Data Folder The default installation of Ponemah creates a folder that all data w...

This is a workaround for fixing the database in Ponemah v6.30 to permit longer time spans between Glucose MultiCal points to be acceptable. There are two options to fix the database. Manually open...

The Species setting is used by Ponemah to configure analysis module settings for accurate data analysis. Therefore, it is critical to define the Species setting to the species whose heart rate most...

The following video demonstrates APR-1 configuration, as well as how to setup the Subjects for your Experiment using Ponemah v6.x. Subject Details and Channel Details are explained. This video buil...

This video outlines the process to perform a multi-point glucose calibration using Ponemah v6.1x. The process is similar in later versions of Ponemah; however, some of the UI button names have been...

The following video demonstrates how to use Events to mark points of interest in the data using Ponemah v6.x. It will also demonstrate how to mark the events during an Acquisition or while in a Rev...

In this tutorial, an overview of Ponemah v6.30's Parameter Viewer feature is provided by a member of DSI's Data Services Team. In it, learn some of the different reasons Parameter Viewer may be use...