NeuroScore
-
NeuroScore - Values in the Sleep Overview
In order to explain the values displayed in the Sleep Overview of the Sleep Report, let's take the following very simple example: It consists of the following sleep bouts: Epochs count Sleep...
Read More >> -
How to set a specific paper size for Neuroscore Reports
When using the reporting feature in Neuroscore to generate a report, NeuroScore uses a third party report builder called Active Report. By default, the paper size setting will be set to the size ...
Read More >> -
"A valid license could not be found" when starting NeuroScore
Symptoms NeuroScore displays the following window, showing that the license file is valid and that the dongle is connected: However, when clicking Finish, NeuroScore displays the following ...
Read More >> -
Updating a NeuroScore License File
To update a NeuroScore license: Open NeuroScore. Select Help | About Application… Click Update License. The existing license information will appear. Enter the new key code and click Submit. ...
Read More >> -
Power Spectrum Differences between Neuroscore Versions
In Neuroscore version 3.0 and below, the spectral calculations in the signal sheets were not normalized. In Neuroscore version 3.2 and above a checkbox was added in the Tools | Options menu in the...
Read More >> -
Creating Custom Time Stamps in a NeuroScore Signal Grid
To view time stamps to the level of milliseconds in NeuroScore Signal Grids or to display the date and time in a different order a custom time stamp will need to be entered. To do this, go to the ...
Read More >> -
Video Tutorial - NeuroScore Software Overview
This video details the major portions of NeuroScore and is designed to show you its capabilities. The following topics will be covered: Software Overview Using the Recording Library Navigation wit...
Read More >> -
NeuroScore File Compatibility
The following table outlines the file types that are compatible per NeuroScore version. NeuroScore Version 3.2.0 3.0.0 2.1.0 2.0.1 2.0.0 1.1.1 1.1.0 1.0.0 File Compatibili...
Read More >> -
NeuroScore Z-ratio Definition and Calculation
Definition: The Z-Ratio calculates the difference in low frequency power (LF: 0.5-8Hz) to high frequency power (HF: 8-20Hz) in relation to the total available power. The result is in a range from ...
Read More >> -
NeuroScore Powerband Calculation
The following outlines the process NeuroScore uses to calculate the power in a given frequency band. First, the Periodogram is calculated to compute the power values within discrete frequency inter...
Read More >> -
How to share or preserve NeuroScore Analysis Protocols
The Analysis Protocols settings are saved in the file “NeuroScore.zdb” under NeuroScore Local Settings for each user. The location of this file is C:\Users\[UserName]\AppData\Local\DSI\NeuroScore w...
Read More >> -
Importing Spike2 file into NeuroScore
Cambridge Electronic Design (CED) manufactures an acquisition and analysis program called Spike2. The files generated by Spike2 may be read directly by NeuroScore by adding them to the Recording Li...
Read More >> -
Calculating Average Spike Amplitudes in NeuroScore
To get the average spike amplitudes: Run the Spike Train analysis with Individual Spike Marker enabledDSI typically recommends applying a 10 Hz high pass filter on the signal to remove any backgro...
Read More >> -
How to use NeuroScore to calculate the spike frequency during a seizure.
Often, researchers conducting seizure analysis with NeuroScore would like to calculate the number of spikes per second for each seizure (Spike - Train) detected. To do this: Begin by running the ...
Read More >> -
Sleep Latency Calculations using NeuroScore
The following definitions describe the available sleep latency calculations available in NeuroScore: SWS onset is the latency between the first scored epoch and the first SWS epoch Paradoxical ons...
Read More >> -
Configuring the Rodent Sleep Scoring 2 Module
Background Similar to the Rodent Sleep Scoring detector, the Rodent Sleep Scoring 2 detector uses one or two EEG signals, along with EMG and activity data to automatically assign a vigilance stage ...
Read More >> -
Video Tutorial - Create and Execute NeuroScore Batch Processing Workflows
The following video outlines the process to create and execute NeuroScore Batch Processing workflows. Batch Processing is compatible in NeuroScore v3.0 and greater. Presenter: Guðmundur (Gummi) Sæv...
Read More >> -
Video Tutorial - Using the Rodent Sleep Scoring 2 with Visual Tuning Tool
This video provides an overview on How to use the Rodent Sleep Scoring 2 with Visual Tuning Tool. Rodent Sleep Scoring 2 is compatible with NeuroScore v3.0 and greater. It is licensed with the orig...
Read More >> -
How to use NeuroScore to calculate the power in a specific frequency band for a seizure.
Often, researchers conducting seizure analysis with NeuroScore would like to evaluate the power in a given frequency band during a seizure (Spike - Train). To do this: Begin by running the automa...
Read More >> -
How to configure a NeuroScore Signal Sheet to help assess sleep scoring visually.
Background: When using the automated Rodent Sleep Scoring modules it is important to be able to assess sleep stages visually in order to appropriately adjust automatic sleep scoring settings. This ...
Read More >>