Knowledge Base
General DSI Support Center Information
PhysioTel Implants
- DSI Return Shipment Portal Video Tutorial for European Countries
- 4ET Implant Battery Calibration Settings
- Adjusting the Timeout of a PhysioTel™ Digital Implant
- Assessing End of Life using Battery Voltage
- Battery Monitor Mode Overview
- Calibrating the HD-XG Continuous Glucose Telemetry Implant
PhysioTel Hardware
- A Consideration When Comparing DSI’s Ambient Pressure Monitor Readings to Other Barometers and the Weather Service
- Accessing the Communication Link Controller (CLC) or Matrix 2.0 (MX2) Diagnostic Page Using a Web Browser
- Activating PhysioTel Digital Implants using the Power On Detector (POD)
- Adjusting the RSSI Threshold for a Transceiver (TRX) and a Digital Implant
- Ambient Pressure Reference (APR) Specifications and Dimensions
- Anipill Monitor Firmware Installation Instructions
Ponemah v5x Acquisition
- Configuring Study Workups when using Ponemah SEND module
- Data Synchronization Card Installation Instructions for Ponemah 5.20-SP9+ and Ponemah v5.3x
- How to uninstall Ponemah 5.20 P3Plus and P3PlusTest SQL databases
- Appending Marks Section Name to Study Generated Files using Ponemah v5.20-SP8
- How to edit the Ponemah v5.x Experimental Protocol Header Information
- Video Tutorial - Ponemah v5.x Telemetry Protocol Setup
Ponemah v6x Acquisition
- Recording 8 video sources with Ponemah v6.x and Noldus Media Recorder 4.0
- How to create a new experiment in Ponemah 6.4x and later from PNMWAV files
- Changing Ponemah 6.x Experiments out of Aggregate Mode
- How to configure the Ponemah v6.x PC clock when the use of Day Light Savings is not desired.
- Changing sample rates for an implant in the middle of an experiment in Ponemah 6.x
- Ponemah v6.x File Types and Descriptions
Ponemah Review (Analysis & Reporting)
- Recommendations for Moving Ponemah v5.x and v6.x Data Files for Remote Analysis
- Configuring a Custom Derived Parameter to Report Holzgrefe's heart rate corrected QT Interval (QTch)
- Variabilitly Analysis - Derived Parameters
- Data Parser
- Video Tutorial - How to Create Animal Specific Calculations using Ponemah Custom Derived Parameters
- How to create a Poincare Plot using Ponemah Custom Derived Parameter
NeuroScore
- NeuroScore - Values in the Sleep Overview
- How to set a specific paper size for Neuroscore Reports
- "A valid license could not be found" when starting NeuroScore
- Updating a NeuroScore License File
- Power Spectrum Differences between Neuroscore Versions
- Creating Custom Time Stamps in a NeuroScore Signal Grid
Video with DSI Software
- Associating Cameras to Ponemah Subjects
- IP Camera Setup
- Configuring Cameras in Media Recorder
- Network bandwidth considerations when using IP cameras.
- Project Integration Synchronization Physiological Data with Behavioral data: Sync of Ponemah PC vs. Media Recoder Noldus PC(s)
- Axis M1145-L Camera specification
Surgical Manuals and Videos
Surgical Notes
- On-Site Cleaning and Re-sterilization of DSI Transmitters Using Actril
- Anesthesia Reference Manual
- Biopotential Leads: What to Do with Them when Not Being Used
- Can I re-sterilize my re-gel syringe(s)?
- Causes of Rat Hind Limb Paralysis
- Creating an Anesthesia Nosecone for Rodents
LabChart PhysioTel Connect
ACQ-7700 and Amps
Jacketed External Telemetry
- JET PoE Receiver and Device Compatibility
- JET Bluetooth Receiver Invalid Receiver Message
- JET Audit Log Improvements in Ponemah v5.20-SP8+
- JET Device Battery Information
- JET RIP Module Battery Information
- Pneumotachograph Connection Information for JET RIP Calibration
Whole Body Plethysmography (WBP)
- Cough Box Flow Signal Calculation
- WBP Temperature & Humidity Probe Averaging
- Leak Test Process for FinePointe WBP Chambers
- FinePointe Accuracy Improvements
- WBP Pneumotach Screen Counts
- FinePointe WBP Product Maintenance Guide
Noninvasive Airway Mechanics (NAM)
Resistance and Compliance (RC)
Pulmonary Function Testing (PFT)
Inhalation Tower
Buxco Hardware
- Aeroneb Lab Nebulizer Head Specifications
- Calibrating the Buxco Multi-function Bias Flow
- DSI Buxco Controller Power Supply Specifications
- FinePointe Respiratory Chamber and Accessory Care
- How to have a TSI Flow Meter Calibrated.
- How to repair and calibrate a Validyne Transducer
FinePointe Software
- Choosing the server URI when configuring FinePointe Control Panel
- Connecting to a Data Collection Session Remotely in FinePointe
- FinePointe 2.5.0 Release Notes
- FinePointe Biosystem XA Data Import
- FinePointe License File Upgrade Installation
- FinePointe Software Compatibility Matrix
Dataquest ART
- ART Manual: Configuring and Using the Distributed Receiver Array (DRA)
- How to extract Heart Rate Parameter from ECG waveforms in Dataquest ART
- Filtering EMG Data using Dataquest ART
- PhysioTel and PhysioTel HD Configuration using Dataquest ART/OpenART Interface
- How to change the parameters averaging interval in Dataquest ART
- BioDAQ system setup with DSI telemetry
iPRECIO Management Software
- Accounting for animal growth when programming iPrecio pump flow rates
- Can iPrecio pumps be used with an MRI?
- Installation serial number is not working when installing iPRECIO Management Software for SMP-200
- iPRECIO Management Software for SMP-200 crashes when setting up operators
- Solving Error 1609 when installing the iPRECIO Management Software for SMP-200 on a non-English version of Windows
- Windows Font Scaling causes iPRECIO Management Software dialog issues
Applications
Anipill
Ponemah Release Notes
Can't find what you're looking for? Contact Us