Overview

This guide will help you quickly set up your DSI implantable telemetry system and start using Ponemah to collect, analyze, and report data. Note: This guide does not cover software installation. Refer to the latest release and installation note for the version you are using.

This guide will go step-by-step through the following procedures. Click a section to go to that page.

Step 1: Hardware Setup

Step 2: Understanding Experiments

Step 3: Implant Configuration

• PhysioTel and PhysioTel HD
• PhysioTel Digital
• SoHo Telemetry

Step 4: Subject Setup

Step 5: Graph Setup

Step 6: Sampling Control

Step 7: Data Acquisition Overview

Step 8: Data Review

Step 9: Experiment Data Export